How to Make a Stone Pendant Necklace: Easy Beginner Guide
November 03, 2026
Key takeaways
- You need a drilled stone or a stone suited to wire wrapping, jewelry wire, round-nose pliers, cutters and a chain or cord.
- A simple wire wrap takes about 20 to 30 minutes once you know the steps.
- Practice on copper wire before using good materials.
- If you would rather skip the tools, ready-made stone pendant necklaces are available with free US shipping.
A stone pendant necklace is simple, wearable and surprisingly easy to make at home. If you have never made jewelry before, wire wrapping is a good place to start. This guide walks you through the process step by step.
What you will need
- A stone with a drilled hole, or a small raw crystal to wrap
- Jewelry wire (20 to 24 gauge is a good starting size)
- Round-nose pliers and flat-nose pliers
- Wire cutters
- A chain or cord, and a clasp if it does not have one
- Jump rings
Step 1: Choose the stone
Pick a stone that is not too heavy for the chain. Quartz, amethyst and tourmaline are common choices. Smooth stones are easier to wrap than very rough ones.
Step 2: Wrap the stone
- Cut about 30 cm of wire.
- Place the stone near the middle and bend the wire around it in a loose cradle.
- Cross the wire above the stone and twist the two ends together two or three times.
- Use the pliers to tighten gently so the stone sits snugly.
Step 3: Make the loop
With one wire end, use the round-nose pliers to curl a small loop above the twist. Wrap the tail around the base of the loop two or three times, then trim the excess and press the end flat so it does not scratch.
Step 4: Attach the chain
Open a jump ring with two pliers, thread it through the loop and the chain, then close it. If you are using a cord, thread it through the loop and tie or fasten it with a clasp.
Tips for a better finish
- Use soft wire first to practice.
- Keep wire ends tucked in.
- Choose a chain length that suits your neckline, usually 40 to 50 cm.
Prefer a ready-made one?
If you would rather not make it yourself, we have ready-made wire-wrapped and raw crystal pendants in our Stone Pendant Necklaces collection, with free shipping across the US.
Shop our picks
- Wire-Wrapped Raw Crystal Pendant Necklace - from $19.99
- Tree of Life Wire-Wrapped Stone Pendant Necklace - from $19.99
- Raw Black Tourmaline Pendant Necklace - from $22.99
- Hexagonal Quartz Crystal Pendant Necklace, Gold Chain - from $19.99
Browse more: Stone Pendant Necklaces | Gemstone Bracelets | Charm Bracelets. Every order ships free within the US, with delivery in about 7 to 12 days.
Frequently asked questions
What do I need to make a stone pendant necklace?
A stone, jewelry wire, pliers, wire cutters and a chain or cord. Jump rings help attach the pendant.
Is wire wrapping hard for beginners?
No. The basic wrap and loop can be learned in one session.
What wire gauge should I use?
20 to 24 gauge is a common starting range.
Which stones are best for beginners?
Smooth, medium-sized stones such as quartz are easy to wrap.
How long should a pendant chain be?
40 to 50 cm sits around the collarbone for most people.
Related reading
Questions about sizing or an order? Contact us at support@stonewrist.com.
